WDS1600 Drum Sander drive gear replacement
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I was able to acquire a Ryobi WDS1600 drum sander for super cheap due to a broken gear. This gear replaces the main…
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 79
- Wydruki
- 0
- Wyświetlenia
- 407
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
I was able to acquire a Ryobi WDS1600 drum sander for super cheap due to a broken gear. This gear replaces the main drive gear that interacts with the drive shaft. Only time will tell how long a 3d printed gear will work for this application, but if mine breaks I'll update the post with that info (if I remember I posted it).
Ultimately I'll probably try to get one machined out of metal, but this is a good placeholder and also provides all the necessary dimensions.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
Rafts:
Doesn't Matter
Supports:
No
Resolution:
.2mm
Infill:
100%
Filament: eSUN PETG Black
Notes:
Printed at 100% as this is a gear to drive a belt with relatively high torque, overall it only takes about 10 extra minutes compared to 15% infill.
Category: Parts