VS Code Logo
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
VS Code has become one of the most popular development environments so I decided to make a quick design for a magnet…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 316
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution
VS Code has become one of the most popular development environments so I decided to make a quick design for a magnet for it. There are two options either one with a 6.2mm by 3mm hole for a neodynium magnet or a flat backed one if you want to stick a flat magnet on the back.
If you want to change the design up, grab the uploaded svg file which is one I slightly modified from https://github.com/dhanishgajjar/vscode-icons.
Also note that the license should be MIT given that's the source code license, but that is not an option in the drop down so I just selected the closest one ¯*(ツ)*/¯
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
Supports:
Yes
Resolution:
0.4mm
Infill:
20% (can probably go lower)
Filament:
MatterHackers PLA
White
Category: Signs & Logos