hammer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Great hammer for "persuading" part together with two striking faces for a soft mallet or harder material as needed
- Ocena
- 5 / 5
- Polubienia
- 77
- Pobrania
- 536
- Wydruki
- 9
- Wyświetlenia
- 2493
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Public Domain
Printed each part at. 2 mm what is three perimeters. I added infill modifiers on the threaded ends of the hammerhead to the chamfer at 100% infill. Add a brim around the inner and outer of the handle. Everything else can be printed normally you probably won't be hitting anything hard enough to break the head or handle. The string faces can be infilled to whatever you feel is necessary. I made mine out of PETG and it worked well. Glue the handle in the head together with used five minute epoxy. And you can print the striking faces out of whatever material you like. Add support as you see fit. make striking face 3mm.