M28 Panel Mount Powerpole
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This mount is intended to mount an Anderson Powerpoole 15-45amp plug into a 28mm-30mm panel hole. These connectors are…
- Ocena
- 5 / 5
- Polubienia
- 20
- Pobrania
- 143
- Wydruki
- 4
- Wyświetlenia
- 944
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
See my M28 V2 design: https://www.printables.com/model/1364854-m28-panel-mount-v2
This mount is intended to mount an Anderson Powerpoole 15-45amp plug into a 28mm-30mm panel hole.
These connectors are typically used by amateur radio operators for 12V power.
For the pin to retain the Powerpole connect I have used paperclips, cotter pins, and wire. I have recently created the 3D printable pin and have only tested it for fit.
The washer is intended to keep the assemble from turning when mounter in a 19" 1U blank. It is not required, but you may want to adapt it for similar use.
This is a remix of my M28 Panel Blank.
Category: Hobby