LD-ish Boomerang
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Boomerang inspired by long-distance shapes, although not an LD boomerang itself.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 102
- Wydruki
- 0
- Wyświetlenia
- 413
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
Caution: This boomerang will not fly properly right off the printer. Please refer to the tuning instructions below.
This boomerang reminds me a bit of Volker Behrens' Geronimo Hook, as well as contemporary long-distance boomerangs. It is not a long-distance boomerang, but it does some nice mid-range circles if tuned properly.
As printed, it will most probably not make a full return, but crash about half way into the flight. To compensate for that, bend some dihedral into both wings, i.e., bend both wings upwards so that they are 1-2 mm off the table if you lay down the boomerang flat at the elbow. With the amount of dihedral, it should be possible to dial in some nice, low flights. Ideally, I like this kind of boomerang to stay almost level during the whole flight.
Throw low and with a bit of layover.
How I Designed This
Constructed in Onshape. Have a look at the document to see how it was done and to make your own modifications if you like.
Category: Sport & Outdoors