Altiods Insert, now with Magnet insets!
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This as another Altoids insert that has insets for small 12mmX3mm Magnets.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 360
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
This as another Altoid insert that has insets for small 12mmX3mm Magnets. The insets are a bit oversized to give room for glue and magnet size variance.
No supports necessary. I printed my models at layer height: 1st layer .2mm and all others .3mm
The magnets I used were from Amazon: “40pcs Magnets Disc Countersunk Permanent Magnet Fastener Magnets 12mm D Disc Countersunk Pe12mmX3mm,Magnets With Holes,Countersunk Hole 4mm (Disc:12x3-4mm)”
I used a small b it of JB-Weld to glue the magnets to the divider.
Happy Printing!
You can help
To help cover the expenses of printing prototypes for the models I share, please consider a donation by purchasing an item from my Amazon wishlist here