Clip in hook (i.e. for VR ceiling hangers)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hanger to clip into ceiling tiles.
- Ocena
- 5 / 5
- Polubienia
- 1
- Pobrania
- 24
- Wydruki
- 2
- Wyświetlenia
- 283
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
So I bought a Kiwi cable management system for my virtual reality HMD. My ceiling has wooden panels and it was no option for me to either damage them with screw-in hooks or the sticky glue hooks they deliver. I wanted to install it without damaging anything.
As a solution I designed this hook to be clipped into the tiny gaps between the panels. Maybe it will help somebody else, too!
I printed them with 85% infill but it doesnt really matter on that size. You can also choose 100% or try smaller values.
Mine are printed from PETG and are quite flexible and durable. They never came off or broke. I tried to print one in wood PLA for the look, but it wasn't stable enough - the hook came off from the base. Don't know how normal PLA will perform.
I also did no testing how much they can carry, so try with caution. The Kiwi system and me pulling on my headset are no problem for them however.
Print Settings
Printer brand:
Printer:
Rafts:
Yes (Skirt)
Resolution:
0.2
Infill:
50 - 100
Filament brand:
prima select
Filament material:
PETG
Notes:
Support is needed for the hook to be printed correctly. I set the support overhang to 65%.