FCS Infill Chip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The Filament Color System (FCS for short) allows you to produce infill reference chips for materials you print.
- Ocena
- 5 / 5
- Polubienia
- 23
- Pobrania
- 86
- Wydruki
- 2
- Wyświetlenia
- 678
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The Filament Color System (FCS for short) allows you to produce infill reference chips for materials you print.
Features
- Easily determine infill used with past prints. Each chip has the infill debossed onto the top face.
- Each chip is 48.2mm x 48.2mm x 2mm.
- Each chip is 4g of material. Minimal material used and takes ~30min to print.
- Two thicknesses allow you to get a sense of opacity of each color.
- 4mm hole allows chips to be attached to a keychain or piece of string forming a color pallete.
Frequently Asked Questions
Why not use one of the dozens of material chips already on printables/thang/thingiverse?
I wanted each chip to have sufficient information to determine the specific material and reorder it. This is possible by having both the debossed brand and material on each chip. I wasnt able to find a collection of chips elsewhere that had this.
You are missing Brand/Material X!
Leave me a comment and I'll add it! There are ALOT of materials and brands out there. I have added the ones I am aware off but always happy to add more.
Why dont the chips have the color debossed into them?
Primarily because that would result in a magnitude more files to manage and require scrapping alot more data.
Secondly, most people can see the color of each chip. So outside of a few rare cases where a single brand has 2 similair colors of the same material, it shouldnt be an issue.
Print instructions
All models should be sliced with your preferred material settings, 10% infill, no supports. Each chip has two bodies, the middle body should have its infill adjusted as needed and remove all top/bottom layers. Print Settings → Infill → Top/Bottom Fill Pattern. See the 3mf group files for an example
Chips
| Description | Image | |
|---|---|---|
| FCS Color Chip | A simple color chip |  |
| FCS Texture Chip | A simple texture chip (Coming Soon) | |
| FCS Infill Chip | A simple infill chip |  |
| FCS Blank Chip | A blank chip. Make your own custom chips. |  |
Accessories
| Description | Image | |
|---|---|---|
| FCS Label Mounting Solution | Use this to label what filament is stored in your dry box, Ikea samla or where ever else you want to label filament. |  |
| FCS Label Stand | Use this to see what material you have loaded via a camera feed. |  |
| FCS Storage Box | A simple self contained solution for storing FCS chips. |  |
| FCS Gridfinity Storage Solution | Two storage tray designs to store your FCS chips in your Gridfinity setup. |  |
| FCS ALCH Storage Solution | A simple storage tray design to store your FCS chips in your ALCH setup. |  |
| FCS Skadis Storage Solution | A simple storage tray design to store your FCS chips in your Skadis peg board. |  |