1 / 2
MTF Mount for Hexafoc
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Physics & Astronomy
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
MTF (MagneTicFocuser) mount for the Hexafoc focuser
This is a mount to magnetically couple the MTF to the telescope. It fits on all Hexafoc focusers such as the ExploreScientific ED80 or identical focusers.
Link to the MagneTicFocuser [MTF]
https://www.printables.com/de/model/251874-magneticfocuser-mtf
What else you need:
- 4x neodymium magnet N45 9x5 mm
- 2x M3 grubscrew
Glue the magnets in place with a drop of superglue, press them in as far as they will go, they must be 1mm below the edge.
Attachment to the telescope:
Unscrew the knob (left) from the focuser and attach the coupler to the shaft with 2 M3 grubscrews.
Slide the mount over the coupler and screw it tight with the brake screw.
That was it.
Happy printing!