1 / 5
Everrain Insert
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Everrain insert for all in pledge
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 485
- Wydruki
- 2
- Wyświetlenia
- 2490
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (12)Wydruki i komentarze (Wydruki: 2) (Komentarze: 5)Remiksy (2)Kolekcje (18)Powiązane
This insert will fit the all in pledge into the main box and the lid will closer perfectly unless you store the neoprene playmats outside. You can also fit playmats inside the box for a close to perfect fit, if you ditch the original player board and use the neoprene player board.
I printed mine with a 0,32mm layer hight and 15% infil. No support or raft is needed.