Led Lenser T7 Battery Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I found another battery cage for a Led Lenser T7 on Thingiverse but the thread was too small, and it had no holes to…
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 145
- Wydruki
- 1
- Wyświetlenia
- 807
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
I found another battery cage for a Led Lenser T7 on Thingiverse but the thread was too small, and it had no holes to screw down the cap. The button also did not fit properly. Anyway, I wanted to experiment with printing threads. I modeled this to fix my flashlight, using the cap from the other design.
This thread screws in quite tightly and needs firm guidance as it is prone cross-threading (mine is, at least). The thread seems to an undersized 21x1 metric thread
Category: Replacement Parts