Pen Pal (Sharpie Case)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A friendly case for 6 to 8 Sharpies or other writing implements
- Ocena
- 0 / 5
- Polubienia
- 36
- Pobrania
- 64
- Wydruki
- 0
- Wyświetlenia
- 571
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Share Alike
I had an idea for this Sharpie case that looks like a Sharpie. As I drafted the proportions of a Sharpie that can hold roughly 6 Sharpies (half a standard Sharpie box) I decided my Sharpie really looked like it should have a friendly Sharpie face. In the end I found that my Sharpie can hold as many as 8 standard fine point Sharpies (as pictured), but you may need to jiggle a little to get the lid on the Sharpie with that many Sharpies inside.
Sharpie
Print Settings (as in the gcode):
- Layer Height: 0.2
- Infill: 10% support cubic combine every 2 layers
- No supports
Pictured Filaments are Jessie PLA in Black and "Vanilla Bean Ice Cream"
Notes:
The body and lid are a friction fit joint because I wanted it to be like a proper Sharpie (last time, I promise), but the layer lines can make removing the lid difficult sometimes. A little twist does the trick though. I'm not sure I'd trust the friction fit to stay closed if put in a bag, but if you like to live dangerously like that I'd recommend 4 perimeters to strengthen the clip on the lid.