Star Wars First Order TIE Fighter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
First Order TIE/fo and TIE/sf Fighter at 1:270 scale
- Ocena
- 5 / 5
- Polubienia
- 77
- Pobrania
- 458
- Wydruki
- 2
- Wyświetlenia
- 1546
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution
The TIE/fo and TIE/sf fighters are the First Orders primary starfighters. The TIE/fo is the standard TIE fighter, but unlike the imperial TIE/ln it is equipped with shields. The TIE/sf is a special forces variant, equipped with shields, a hyperdrive, a turret and space for a gunner.
These models are at 1:270 scale. Each is 24.4mm long, 25.1mm wide and 31.0mm tall.
For a holder, the version with peg is compatible with a small pin and base.
Print Instructions
Printed at 0.15mm layer height. Requires supports on buildplate.
Your silcer will probably add unecessary supports around the wings. You can block those out to save time and filament.
If you want to support me, you can do so via this link: https://ko-fi.com/printingdaniel#
[UPDATE 2023-04-04] Modified wings, new photos