1 / 7
LED front and rear bumper for Traxxas E-Revo 1/16
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Front and rear bumpers with LED lights for the Traxxas E-Revo 1/16
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 130
- Wydruki
- 0
- Wyświetlenia
- 1395
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (27)Powiązane
I wanted som lights on my E-revo so i designed and printed some. They are intergrated in the front and rear bumper.
I wired the front lights in a series connection so 6V from the reciever would not be to much volts.
The rear lights were also wired in a series connction but with a resistor in between the LEDs so the 6V would not destroy the LEDs.
5 mm LED.
I added a simple wiring diagram in the pictures.