MEDIUM FORMAT CAMERA - VERSION 2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3D printed medium format camera for Mamiya Press lenses.
- Ocena
- 5 / 5
- Polubienia
- 460
- Pobrania
- 1441
- Wydruki
- 5
- Wyświetlenia
- 17 093
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial
I uploaded a video where I show the design and assembly process.
I tried making the camera as simple as possible, but some parts might be difficult to get. The ratchet wrench components used for the film advance mechanism are totally worth it: makes the winding experience very satisfactory. If you can't find the exact same wrench (or another different that works) there is a remix with a 3D printed mechanism.
The metal rods could also be 3D printed or modified in the design.
Parts list:
- 4 M5x20mm screws for the front part.
- 1 M5x30mm screw for the top part (an M5x20mm is also suitable).
- 5 M5 7mm long threaded inserts (shorter ones are also suitable).
- 4 washers (optional).
- 1/4"-20 nut (for the tripod mount. Keep in mind that the one I used was a blind one. If you are using normal nut, you'll need to print the ‘Nut cap’ stl).
Compatible lenses:
All Mamiya Press lenses.
For any further information don't hesitate to contact me via [email protected], @fdezjavier on Instagram or leave a comment.