1 / 7
Steam Velcro Strap Brace for Power Banks - For Deckmate — zdjęcie 1
1 / 7

Steam Velcro Strap Brace for Power Banks - For Deckmate

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A DeckMate compatible brace to strap items to using Velcro cable ties

Ocena
5 / 5
Polubienia
16
Pobrania
117
Wydruki
2
Wyświetlenia
1749
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Video Games
Licencja
Creative Commons — Attribution — Noncommercial

A Steam DeckMate compatible print to strap devices to such as power banks, USB-C Hubs, or NVME drives) as an alternative to the universal puck. 

Use Velcro cable ties for a non-permanent method of attaching devices; I suggest buying a bulk pack similar to these.

Several versions of this print are attached: the important ones are as “for Power Banks” and “for Hubs”. The former is to be used with the larger/chunkier power banks most end up using with the Steam Deck (Baseus Power Bank, Insignia, Anker PowerCore III, etc.). Note that currently, the brace is only around 70 mm/2.755" wide, but it should be compatible with the 83 mm/3.3" wide power banks. Importantly, if you want to strap your power bank to the brace, remember you can link Velcro Cable Ties to one another.

The “for hub” brace is 40 mm/1.7" wide, and designed to be used with smaller devices, such as USB-C hubs and NVME Drives. I also included a 70 mm wide brace that is only 100 mm/3.94" long just in case someone finds use for it.

Each brace is designed so you can mount them either vertically or horizontally to the DeckMate mechanism (the “for hub” braces only accommodate one direction, however). Additionally, each brace has a version with a small edge on one side that prevents strapped items from sliding out if you were to mount them vertically and shake vigorously for some reason, but there's a version with the edge removed so you can mount longer items if you need to (just don't shake it!).

I made these with my screw holes edit of the DeckMate mechanism in mind, which I included in the files, but the holes in the braces should be large enough to be compatible with the old version.

Tagi