1 / 3
The One Ring Slip Case Dice Holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This replaces the thin clear plastic dice holder that came with Cubicle 7's The One Ring slip case version of the rules.
- Ocena
- 0 / 5
- Polubienia
- 22
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 949
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (27)Powiązane
The clear plastic holder that came with the slipcase version of The One Ring RPG by Cubicle 7 has seen better days. I created this to replace it. The design used is from the gates of Moria. It's sturdier than the clear plastic and something I think looks a bit better.
Printing Instructions:
- Pictured is .2mm layer height, if you want a smoother look, you can use a more detailed height. I like the stitched look the .2 gave it.
- Add the DiceTrayBody.stl to the bed in PrusaSlicer, right click on the name go to Add Part, then Load. Select the DiceTrayDesign. It will go where it's supposed to automatically.
- Adjust your XY Size Compensation under Printer Setting-Advanced-Slicing to 0.15 so the details are printed.
- I used paint on supports for the tray, and support blockers for the design (still not sure why it was trying to add them. I also used an inner and outer brim. That kept it stuck to the bed very well while printing.