Airflow direction changer for Xiaomi Mi Vacuum Cleaner G10
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Clip-on that changes the airflow direction for G10 Vacuum
- Ocena
- 4 / 5
- Polubienia
- 15
- Pobrania
- 100
- Wydruki
- 1
- Wyświetlenia
- 739
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
I had a problem with my Xiaomi Mi Vacuum Cleaner as when vacuuming in narrow places such as staircase it blew air to sides which bounded from the walls blowing off dust in the air.
This simple airflow changer makes the air goes to the back of the vacuum, which helps with dust flying around.
When not in use you can move the part up and the air flows to side again :)
Very useful part.
Xiaomi Mi Vacuum Cleaner G10 has an engine enclosure diameter of 72mm, so it probably will fit other models as well.
Printed in PETG as vacuum may get quite warm and may deform when printed in PLA.