Wrench holder for the FlowCine xSpine Steadicam Vest
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Wrench holder for the FlowCine xSpine. Fits both sides with back mount, but only the opposite side with Front Mount.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 531
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial
I didn't like the factory tool holding clip, so I designed this small wrench holder to fit on the lower front.
It mount to both sides with the back mount fitted, but only the opposite side with Front Mount due to limited clearance.
To mount you simply unscrew the 4 x hex bolts holding the waist strap, remove the 4 x plastic spacers and put the bracket above the aluminum plate. and fit the 4 screws again.
The bracket has a 9mm hole that needs an inset for the wrench dimension. I have included a 5mm insert for the xArm canister wrench. Print the insert in a visible color to make it easier to dock the wrench in the dark.