1 / 3
Tiffen M1 monitor bracket for TvLogic F7H Monitor
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bracket to fit the TvLogic F7H 7" Monitor on the standard M1 monitor rods. It reuses the original rod mount+screws.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 491
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (6)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (11)Powiązane
My Transvideo Cinemonitor died, so I created this bracket to fit the TvLogic F7H on the M1 monitor rods.
Print with supports, and high infill level.
Use the original rods, tilt bracket and 3x screws
The yoke side tilt bearings might need some sandpaper grinding to fit with correct friction. Use M3x10mm screws and nuts on the sides
Use 2 x short standard ¼" Camera base plate screws to secure the monitor in top and bottom.