Rims for Swinger T2M
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of Goodson's Hobbies Rims intended for the T2M Swinger Crawler The rims fit to alternative Tires from…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 294
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a remix of Goodson's Hobbies Rims intended for the T2M Swinger Crawler
The rims fit to alternative Tires from https://de.aliexpress.com/item/32901519574.html
The remix has less details and should be more robust.
Note that these rims does not fit to the original wheel axles (T4942/18) !
As the original Swinger axle is of poor quality, very likely will brake and seems not to be available as spare part I replaced all axles by a modified screw:
I cut off the head of a cylindrical screw DIN 912 M5 x 50mm and drilled 2 holes for the catch pins. Also the holes of the wheel hexagon head must be drilled to 5mm (original was 4.5mm). See attached picture DIY_Axle.JPG.
These modified DIY axles are now robust an I believe they will never brake :-)
For the original Rims there is a replacement for the outer parts of the rims as they tend to brake easily:
Swinger_Blend4org_inner and Swinger_Blend4org_outer
For best printing results I decided to split them into 2 parts. Just glue them together with CA glue and replace the original parts.
Category: R/C Vehicles