Update FranxGoggles with Fatshark Receiver and Storage Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This my Update from the Goggles here https://www.thingiverse.com/thing:4854980 I added another Receiver Case for…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 126
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This my Update from the Goggles here https://www.thingiverse.com/thing:4854980
I added another Receiver Case for Fatshark Format like Eachine Pro58.
And most of all I added a storage box.
The main parts are made of wood. For detailed sizes of all wooden parts see Source File with DesignSpark Mechanical. Of course you can also try to print these parts.
The Inlays shall be glued into the wooden Box. There is also an internal Box with separate snap in cover where you can put your antennas into.
The soft dampers are approx. 10mm thick and hold the goggles safely.
Some mechanical work but at the end the Goggles are stored safely in the box.
Print Settings
Printer:
Franx 3D Printer
Rafts:
No
Supports:
No
Resolution:
200
Infill:
20
Filament:
Das Filament PLA
as you like
Category: Hobby