Filament compartment handle for Funmat HT
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A better mechanism that wastes less space in the filament compartment
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 136
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
One last rather specific upgrade part for the Funmat HT (enhanced) 3d printer:
The original handle for opening the filament compartment protrudes the door and reaches quite far into the printer. This is a problem when printing with wider spools (~1kg) because the inner part of the handle prevents the door from getting closed. Since you're rather likely printing moisture sensitive materials with this printer, having a closed door is a good idea.
Here is where this alternative handle comes into play.
It has an external closing mechanism that uses the original funmat extruder spring (the original extruder is lousy anyway - at the point where the handle starts to get annoying, you'll likely have the extruder replaced by something better anyway) to allow for a hassle-free operation. Use some cut-off filament for the domes (*pimpfl.stl) to keep them in place. Also print the domes twice.
Unfortunately this mod requires drilling 4 holes for securing the parts with M3x6 screws, so please only do it when you don't care for warranty anymore. I hope anything else is self-explanatory... if not, don't hesitate to ask for details.
Printed in PC for heat- and wear-resistance. Also some stiffness is required for it to close properly.