GI Joe APC Seatbelt
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a replacement for a common missing or failed component of the GI Joe APC / CUDA / Night Stalker vehicle.
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 215
- Wydruki
- 0
- Wyświetlenia
- 1583
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Print on the thin edge face with snug supports to prevent the pegs shearing off. See the attached gcode for reference.
Trim the T shaped peg if it is tight. Any elephant foot will make it very tight on that one side, so examine the bed face carefully. The round peg should fit well without adjustment, but if it won't stay latched, carefully heat the tip and compress the peg to make it thicker.
I suggest ABS or ASA, but PETG and PLA should work. I did not need to resize to account for shrinkage even without an enclosure.