1 / 4
Milli: Print in place, support free,articulated millipede — zdjęcie 1
1 / 4

Milli: Print in place, support free,articulated millipede

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Ever wanted an articulated millipede toy that you could 3D print and not need any supports or any assembly and works…

Ocena
4,958 / 5
Polubienia
952
Pobrania
5064
Wydruki
101
Wyświetlenia
14 126
Oceny
95

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Ever wanted an articulated millipede toy that you could 3D print and not need any supports or any assembly and works straight off the bed?

Well here he is.

FDM millipede printed in Snolabs Black Amethyst PLA+. 2 layer height, 10% infill and 1.2mm wall thickness. Ensure you have good bed adhesion and this little fellow will think about taking a walk before he's finished. That said, I didn't need to use a brim.

Resin Millpede printed using Siraya Tech Fast resin at a 0.05 layer height.

Print and go.