PONYO SUN CATCHER
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My daughter is into her Anime, I've been working on sun catchers of late. So ... here's Ponyo.
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 49
- Wydruki
- 0
- Wyświetlenia
- 951
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
My daughter is into her Anime, I've been working on sun catchers of late. So ... here's Ponyo.
This is a sun catcher printed without fancy multi-material mechanisms.
The frame acts like the lead in a stained glass window. It needs to be printed in transparent filament with a change to black at the layer where the lead lines would be.
Once completed, the coloured pieces are then glued into the relevant "gaps" in the frame. I used PVA glue and allowed it to set over a number of days.
The tolerances are really tight, so you may need to sand the parts down a little to make them fit depending on your printers tolerances.
Print instructions
Category: 2D Art Print Settings
Printer Brand: Prusa
Printer: i3 MK3
Rafts: No
Supports: No
Resolution: 0.1mm
Filament: n/a PLA / PET
Notes:
It needs to be printed in transparent filament with a change to black at the layer where the lead lines would be.
Smaller parts may need a brim.
Care must be taken when removing from the print bed as they are between 0.5mm and 1.0mm thick.