Maghex Base
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Improved the structural integrity of the MagHex with Center Mag.
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 127
- Wydruki
- 0
- Wyświetlenia
- 943
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
V1.2:
- Changes interference to make it easier to initially engage magnets with larger chamfer.
- Switched to derived design in Fusion 360 so that all changes to the base model will update other models.
V1.1:
- Updated models to match the parametric design from original design.
- Added model for water with solid bottom for resin pour.
----------------------------------------------------------------------------------------------------------------
Improved the structural integrity of the MagHex with Center Mag as I found the model this was breaking when inserting the center magnet. I believe this uses less material than the original MagHex on thingiverse so I suggest just printing these for all maghex hexes.
I started with printing the original MagHex versions from thingiverse. This model is a significant improvement from bed adhesion to magnet retention. I highly suggest using this over the original model. Learn from my mistakes.