PA11 Carbon Fiber Planetary Gearbox
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Model of planetary gearbox specially designed for Prusament PA11 (Nylon) Carbon Fiber.
- Ocena
- 4,6 / 5
- Polubienia
- 244
- Pobrania
- 853
- Wydruki
- 9
- Wyświetlenia
- 6985
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
Opening model of planetary gearbox for Prusament PA11 Carbon Fiber. The model was specially designed for this type of material as a presentation of the applicability of polyamide material in practice.
This is a working model of the planetary gearbox assembly. You can add any number of planetary gearboxes. Depending on the number of gearboxes the force ratio changes. For example, with three planetary gearboxes, the ratio is 1:64. If you connect 10 planetary gearboxes, the ratio is 1:1000000.
For a description of the individual components, see the figure below -
The model is offered with a shorter or longer crank. You will need 4x M5x35 screws and 4x M5 nuts to mount the gearbox using the holders.
Designed by Jiří Bílek.