R4I Dice Vault/Tray
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted to print a dice box/vault/tray for my set of Role 4 Initiative Diffusion Dice set. Looking at the available…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 323
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted to print a dice box/vault/tray for my set of Role 4 Initiative Diffusion Dice set. Looking at the available designs, the set posed a few challenges:
- it's a 15-die set, which is atypical when it comes to dice sets
- the dice are ~20% larger than a standard set
- the d4s with the set are their Arch'd4s, which are barrel shaped
So I designed this. It also works perfectly fine for storing a couple standard 7-die sets with space for an extra D6, d8, etc.
The magnets used are 1/2" inch (12.7 mm) Pro-mag magnets.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
10% cubic
Filament: Sakata PLA Sparkling Coal
Post-Printing
For the rolling surface of the tray, I glued in a thin layer of foam rubber, followed by a layer of felt. Works pretty well.
Category: Dice