GoPro (Clones) Open Mount Camera Retainer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A retainer that keeps the GoPro (clone) action camera from falling out of the open mount while in use.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 94
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
I needed to come up with a retainer for the general purpose open camera mount provided with my camera to prevent the camera from falling out on rough roads. I've dropped a camera twice before, lost a camera the second time! The solution I came up with slides over the raised brass insert housing on the bottom of the mount, and is secured with a M6 bolt. I went with a nylon 1/4-20 x 1/2" bolt (couldn't find one shorter locally) and two thick nylon washers as spacers. (The longer than needed bolt may come in handy should I decide to add a feature to the mount later on.)
The best orientation in the slicer is for the bottom of the retainer to be placed on the bed. In Cura I suggest using Tree Support. A brim or raft is also recommended.
Resolution: 0.20 mm
Walls: 2
Infill: 15%+, Gyroid
Support: Yes, Tree support recommended
Raft: No
Brim: Yes, 3+ mm
Filament: PETG, ASA, ABS