1 / 1
Tentacle guitar holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
It's not what you think. It's a guitar holder!
- Ocena
- 0 / 5
- Polubienia
- 45
- Pobrania
- 99
- Wydruki
- 1
- Wyświetlenia
- 1665
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (40)Powiązane
The hand is best printed with 3+ walls and 30% infill. The wall mount should have 4+ walls and 30% infill. The pad should be TPU with 2 walls at 15% infill, you can flatten the back into the build plate in the slicer and it won't need supports. The pad is glued into the holder.