1 / 4
Raspberry Pi 400 Keyboard Hinged Wall Mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of https://www.thingiverse.com/thing:4921670 to make the mounts work on an Ikea LACK table side.
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 88
- Wydruki
- 2
- Wyświetlenia
- 981
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 2) (Komentarze: 2)Remiksy (0)Kolekcje (18)Powiązane
This is a remix of https://www.thingiverse.com/thing:4921670 to make the mounts fit on the side of an Ikea LACK table. I also designed two spacers to give ample clearance for the GPIO extender. On the original model I could never get the print in place hinges to work properly so I just “broke” and separated them and then used an M5 bolt with two M5 nuts to create a much more stable hinge. The mounts themselves take M3 bolts, print in .2 with 38% infill.