Magnetic Sharpie Cap Clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a magnetic clip to keep your sharpie close and accessible right on your cap when in the shop or elsewhere.
- Ocena
- 0 / 5
- Polubienia
- 76
- Pobrania
- 140
- Wydruki
- 1
- Wyświetlenia
- 750
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This clips to your cap in a second and allows you to grab and store your sharpie in half that time when you need it.
There is a slight angle on the clip to keep the sharpie somewhat out of your line of sight and prevents it from interfering with your glasses, if you wear any.
This is a very quick and simple print, all you need is two 6x3 magnets and a drop of glue on each of them.
Choose the version you want, Fine or Ultra-Fine.
just push firmly on the sharpie to insert it into the holder.
You can obviously also use the holder to stick the sharpie to any metallic surface.
Printing
As simple as it gets.
PLA, no supports, no brim….. that's it.
Enjoy!