1 / 6
Armattan Chameleon ESC Cover and Bottom Pad — zdjęcie 1
1 / 6

Armattan Chameleon ESC Cover and Bottom Pad

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Finally scrapped off the landing pads off the bottom of the arms and designed these up to keep the motor screws off…

Ocena
0 / 5
Polubienia
3
Pobrania
29
Wydruki
0
Wyświetlenia
419
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial

Finally scrapped off the landing pads off the bottom of the arms and designed these up to keep the motor screws off the cement and so on. These are a one piece wrap around the arm and ECS cover and landing pads for the arms of the Armattan Chameleon.

Should work with any 20mm arm and total height for arm and ESC of about 11mm.

Print instructions

Category: R/C Vehicles Print Settings

Printer: Maker Select

Rafts: No

Supports: No

Resolution: 0.2

Infill: 30%

Notes:

I printed with a 3mm brim and all walls at 1.2mm.

Tagi