Printable toy horse
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
If you don't have a Laser Cutter or a Jigsaw, here is the printable version!
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 45
- Wydruki
- 0
- Wyświetlenia
- 395
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Share Alike
If you instead of laser cutting or jig sawing my original toy horse design, want to print it on your 3D printer, here is a printable version.
It fits on a 300x300mm print bed (minimum is about 295x295) if you rotate it right, and it uses a 24/25mm or 1" round dowel/broom shaft.
Print the two sides and assemble with glue.
It has a cutout to glue in a mane made out of yarn, which is what I personally prefer, just use hot glue and add some yarn, and because of that, it needs a bit of support on each side.
The slot can also be used to glue in the printable mane which I recommend printing in a soft TPU. The printable mane also fits on a 300x300mm print bed.
I deliberately left out any facial features of the horse, to let you paint it as you like, make it unique and add individuality to each horse.