Allen Key Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed this custom box to hold the five Allen keys that came with my Ender 5 Plus.
- Ocena
- 4,8 / 5
- Polubienia
- 45
- Pobrania
- 203
- Wydruki
- 4
- Wyświetlenia
- 1523
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
I designed this custom box to hold the five Allen keys that came with my Ender 5 Plus. I'm not at all sure that they are "standard" with regard to length, so this box might not work with all supplied Allen keys. The hinges are literally sliced off of the model of the "buckle box" of which this is a remix, but I did a different, separate model for the latch as I was not satisfied with the latch on that box. All other parts of this design are entirely mine.
Technically this is a remix of the “buckle box” design on Thingiverse, found here: https://www.thingiverse.com/thing:82620 . This design does not appear to be available on Printables.com as yet.
Print Settings:
Printer brand: Creality
Printer: Ender 5 Plus
Rafts: see below
Supports: No
Resolution: 0.2mm
Infill: 15% (more would probably be better, less is a bad idea)
Filament brand: Duramic
Filament color: Red
Filament material: PLA Plus
Notes:
Might want to use a raft with the latch to avoid "elephant foot" results. Printing the latch "sideways" (as designed) makes it stronger, so I recommend doing that. Fit will vary depending on your printer and material, so some adjustment may be needed.