Magnetic remote holder for Edifier 1280T
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Magnetic remote holder for Edifier 1280T for easy storage on anything that a magnet can stick to.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 345
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Magnetic remote holder for Edifier 1280T for easy storage on anything that a magnet can stick to. There already was another remote holder available on this site but I had other magnets laying around. Also, it's fun to reinvent the wheel. ;)
Printing:
I have uploaded two versions. One is meant to put in the magnets after printing. The other should have the magnets added while printing. After adding the magnets the printer will put two extra layers on top to encapsulate them.
The holder is best printed at 0.15mm layer height.
Beware!
When printing via Octoprint, the will not reheat after pausing the print. Putting the gecode file directly on SD card will fix this.