Denture Bit holder with Holes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I did not like the process to embed the magnets form the original version, so i sliced it up to print the bottom where i can place the magnets in after it printed, then printed the top portion separately. I also added a spot for a larger round magnets in the middle of the top and bottom to hold loose screws or other bits. I provided 3 openings on top and bottom pieces so a pin can be used to join them and have them line up properly. i did not include that file, it is a 8mm pin 5mm deep.
I also made the locations where the bit are inserted open to the magnets in the base, i found the few layers of plastic between the bits and the magnets did not allow for strong enough hold on the bits.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
Rafts:
No
Supports:
No
Resolution:
200
Infill:
15
Filament:
Amazon Basics PetG
Notes:
used 5 perimeters, i found that the hinge pieces that stick up to connect the top and bottom together broke easily with 2-3 perimeters.
Category: Tool Holders & Boxes