1 / 3
Bambu Lab Purge/Flush/Poop💩 bucket for X1 or X1 Carbon — zdjęcie 1
1 / 3

Bambu Lab Purge/Flush/Poop💩 bucket for X1 or X1 Carbon

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Inspired by Bifrost purge bucket, I created this bucket with some improvements and no supports needed.

Ocena
4,951 / 5
Polubienia
2727
Pobrania
35 730
Wydruki
182
Wyświetlenia
109 391
Oceny
143

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Update 08/06/22 - Updated logo to match Bambu Lab Logo.

Inspired by the Purge bucket by Bifrost I created another version with some modifications to suit my needs:

1 - No supports necessary. The logo is now raised, which removes the need for support.

2 - Less filament is necessary. The slanted area is implemented as a wall instead of an extra wall inside the square bucket.

3 - The top cutout is larger so it doesn't block the vent area.

4 - Customizable: You can choose between 2 versions, with or without a logo. I'm also including a file with just the logo that can be printed in multi-color and then glued onto the bucket. By doing this you can print the logo horizontally saving on the wasted filament.

I'm including a file for the Bambu Studio with the logo already highlighted for colors and also the logo STL.

 

Print instructions:

  • In order to fit in the Bambu Lab x1/ x1 carbon make sure you have brim turned off. You don't need brim anyway.
  • I printed with 3 walls and the walls are solid. You can also choose to print with 2 walls but if adding any amount of infill the item will be solid as well. The bucket is 2mm thick. Other than that just default settings.

 

 

Tagi