Tinyhawk 2 nano cam mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I was not very impressed with the stock camera or the way it was mounted on my Emax Tinyhawk 2. So I decided to…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 160
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I was not very impressed with the stock camera or the way it was mounted on my Emax Tinyhawk 2. So I decided to replace it with a Caddx Baby Ratel Nano. But that camera did not fit the stock camera mount at all.
Printed in Filaflex 82A, with 100% infill.
If you want to make one yourself don't forget to rotate it 180 degrees, with the lens aperture facing the bed. Post a make :-)
Print Settings
Printer Brand:
Creality
Printer:
Ender 5
Rafts:
No
Supports:
No
Resolution:
0.20 mm
Infill:
100%
Filament: Recreus Filaflex 82A Post-Printing =============
-
How I Designed This
Designed with Fusion 360
Category: R/C Vehicles