Air Balloon Motor for LEGO
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Updated version can be found here: https://makerworld.com/models/1783606-air-balloon-radial-piston-engine-v2
- Ocena
- 4,75 / 5
- Polubienia
- 231
- Pobrania
- 798
- Wydruki
- 17
- Wyświetlenia
- 6056
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Standard Digital File License
Updated, more airtight and better running version can be found on the MakerWorld:
https://makerworld.com/models/1783606-air-balloon-radial-piston-engine-v2
Demo and assembly guide: https://youtu.be/5G4Wwa94\_aM
Exploded view in 3d viewer: https://skfb.ly/6QL8R
Extra parts needed:
- Nitrile glove
Air balloon
Takes 4m of filament to print (about 5h at 20mm/s on my snail of a printer).
Will print a bit prettier with supports (80deg. overhang, touching buildplate) and ironing.
Parts with names starting with "X_" are optional.
You can insert one balloon into another to get thicker walls. Meant for 2-walled balloon. Idles well with one (with a flywheel), but will hardly pull any vehicle.
- You can use metal M5 washer instead of printed one
- Found that PLA isn't the best material for the design: isn't very slippery, and "fluid" (the clips stop pushing the parts together with time)
Print instructions
Category: Engineering Print Settings
Printer: AM8
Rafts: No
Supports: Doesn't Matter
Resolution: 0.2
Filament: Bestfilament PLA Gray