1 / 3
M5 Nut holder for LowRider 3 CNC, assists Strut to Brace assembly — zdjęcie 1
1 / 3

M5 Nut holder for LowRider 3 CNC, assists Strut to Brace assembly

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Design to hold M5 nuts being snugged/released. NOT strong enough to torque nuts, only helps position, hold and fasten.

Ocena
5 / 5
Polubienia
7
Pobrania
66
Wydruki
1
Wyświetlenia
444
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial

Designed out of frustration when fastening M5 bolts to LowRider 3 brace.  

Use this tool until if/when brace design is tweaked to have recessed holes for all the nuts.

The nut holder is designed to be just the right length, thickness, offset, chamfered and right angled to sneak nuts into the LowRider 3's braces' tight spots.  Limited on how strong the part could be.

100% infill PLA prints will still NOT be strong enough to significantly torque nuts.  Design only helps position, hold and fasten M5 nuts being moderately snugged/released.  You'll still need metal/stiff wrench for high torque usage.