1 / 4
ball bearing base for antique Ritter cutting machine
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a base for the carriage of a very old Ritter cutting machine
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 213
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
I have an old Ritter bread cutting machine where the bread carriage was in very bad shape. So I made a new one and desiged the base for the carriage to print. The carriage is sliding on ball bearings, therefore you need 4 ball bearings with 4mm x 13mm with 5mm thickness (624zz or similar). $2 mm screws and 2 3mm screws for the locking mechanism. Nuts for these as well.
Prints without support!