Creality CR-6 SE Rear Cable Bumper
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This bumper slides over the Y-stepper motor on a CR-6 SE to prevent the cable from scuffing.
- Ocena
- 5 / 5
- Polubienia
- 23
- Pobrania
- 148
- Wydruki
- 4
- Wyświetlenia
- 872
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
The cable for the heated bed on my CR-6 SE was catching on a corner of the Y-stepper motor. When the bed moved forward, the cable would get caught on the edge of the motor and scuff.
This bumper slides over the Y-stepper motor and provides a seamless edge for the cable to slide against, while also softening the angle at the corner. Since adding it, I haven't noticed any more scuffs in my cable.
I had to modify the design after I replaced the plastic spacers under my CR-6 SE's bed with silicone mounts, which caused the bed to sit slightly lower and rub against the cable bumper. To fix this, I flattened the top of the bumper so that it only rises 1mm above the motor and provides maximum clearance.