1 / 3
Analogue Pocket Cartridge Slot Dust Cover
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple dust cover for the Analogue Pocket cartridge slot. Sits flush and has a recess to easily remove when needed.
- Ocena
- 5 / 5
- Polubienia
- 105
- Pobrania
- 1409
- Wydruki
- 18
- Wyświetlenia
- 5253
- Oceny
- 14
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 18) (Komentarze: 21)Remiksy (0)Kolekcje (112)Powiązane
Correct geometry to a gameboy cartridge. No goofy overhangs and designed with 3D printing in mind.
Part is oriented for printing. Just drop in your slicer and send it.
Best if printed in ABS on a well calibrated machine.