Motorcycle ID Card Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
ID card holder to mount a CAC or ID badge on the handlebar of a motorcycle or bike. Models for 1 inch and 7/8 inch bars
- Ocena
- 5 / 5
- Polubienia
- 59
- Pobrania
- 397
- Wydruki
- 1
- Wyświetlenia
- 3085
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
ID card holder to mount a CAC or ID badge on the handlebar of a motorcycle or bike. Models for 1 inch and 7/8 inch bars.
The holder has a cutout to avoid covering the information on both sides of military CACs. Great for getting through security without needing to pull out your ID or to keep it easily accessible with one hand.
Clamp Top is designed to receive six M3 threaded insert nuts. Heat them using a soldering iron, torch, or pan on a stove and push them into the holes until set. I used these: https://amzn.to/3PjZQ3n
Clamp Bottom is designed to work with 22mm or 25mm M3 bolts. I used these: https://amzn.to/3A1yNVN
Card holder can be mounted to the Clamp Top using four 5mm M3 Countersunk bolts. Feel free to use some super glue when attaching for a more secure attachment. I used these: https://amzn.to/3QuNAOt