Spool Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
End brackets for a spool holder, used with 5/8" dowels. Edit: I originally had this listed as 3/4" dowels, as that's…
- Ocena
- 5 / 5
- Polubienia
- 29
- Pobrania
- 131
- Wydruki
- 2
- Wyświetlenia
- 1384
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
End brackets for a spool holder, used with 5/8" dowels.
Edit: I originally had this listed as 3/4" dowels, as that's the bin I was pulling them from at the hardware store. I think their bin is mis-labeled, as I get 5/8" when I measure them.
Instructions
Print out 6 copies of the bracket, you will also need 6 equal lengths of 5/8" dowel, and another 3 equal lengths of 5/8" dowel (they can be the same length as the first 6).
The first 6 lenghts form 2 equilateral triangles, and the last 3 lengths go between those.
Category: 3D Printer Accessories