1 / 2
Low poly bear — zdjęcie 1
1 / 2

Low poly bear

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Nice low-poly bear

Ocena
5 / 5
Polubienia
182
Pobrania
1250
Wydruki
14
Wyświetlenia
3026
Oceny
8

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

It's an old model from thingiverse (not mine). I like it but I didn't find it here. So I decided to share it in Printables. The original is here: https://www.thingiverse.com/thing:192392

I used purple Anyubic PLA and my Anycubic Vyper. The bear was printed with basic Cura settings for PLA (200/60) and with supports (I used tree structure). Layer thickness 0.2mm, infill 15%.
Also I scaled this model to a height 60mm.

A slight mechanical treatment of surfaces at the points of contact with supports may be required after printing.

Tagi