1 / 2
Prusa BEAR Upgrade 2.1 MK2.5/MK3 Y-belt holder with M3 heat set insert
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of original design to fit M3 heat set insert
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 62
- Wydruki
- 1
- Wyświetlenia
- 700
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 1) (Komentarze: 2)Remiksy (0)Kolekcje (17)Powiązane
This is a remix of an original desing https://github.com/gregsaun/prusa_i3_bear_upgrade .It made for M3x4x8 heat set inserts to use with M3x18 screw from Bear Upgrade.
There are two stl-files in attachment - for Bear Upgrade MK2.5 and for Bear Upgrade MK3.
I printed this model with black PETG by Bestfilament on Original Prusa smooth PEI sheet.
UPD 20.02.2024 rev2: Fix the holes dimentions. Now the holes diameter 4.7mm instead of 4.6mm