1 / 2
MG GM Sniper II Titans Beam Rifle
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The model is made to fit the spare hands of the MG GM Sniper II/ GM Command and other kits with the same hands.
- Ocena
- 0 / 5
- Polubienia
- 57
- Pobrania
- 389
- Wydruki
- 0
- Wyświetlenia
- 2030
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (1)Kolekcje (71)Powiązane
There are 2 variants of the rifle: with and without supports. The Supports are made for resin printers and tested by me (Anycubic photon sq with their grey resin and standard lychee settings).
The connection is quite loose but should fit good enough after painting.
The model is also made to fit a MG sized beam saber in the tip of the muzzle.